Making Cannabis Infused Olive Oil

Materials needed:


  1. Grind or break your decarbed flower into small pieces.
  2. Open up the H-Brewer and take out the pot with the strainer. Make sure the stirrer remains inside the strainer.
  3. Place cannabis into the strainer and position it inside the pot. 
  4. Add 3 cups of olive oil and close the infuser lid making sure it locks.
  5. Long press the dial and select Set mode. Set your infuser to 165 °F for 120 minutes. Confirm your selections and then exist the set mode. 
  6. Long press the dial again and select Infuse mode. Confirm your selection. The heating and stirring starts. Once the temperature reaches the set number, the timer countdown starts. Feel free to adjust stirring speed to your liking.
  7. When the countdown ends, unlock the lid and remove the pot together with the strainer from the device using heat proof gloves.
  8. Lift up the strainer and allow the oil to drain into the pot. 
  9. Let the infusion cool down before pouring it into a bottle with an airtight lid.
  10. Refrigerate the infused oil to preserve freshness.